{"title":"Fuel","description":null,"products":[{"product_id":"jeep-tj-fuel-pump-clamping-ring-97-06-wrangler-tj-motobilt","title":"Jeep TJ Fuel Pump Clamping Ring 97-06 Wrangler TJ Motobilt","description":"\u003cp\u003eThe Motobilt Jeep TJ Fuel Pump\/Sending Unit Clamping ring is a quick and easy solution to install the factory fuel pump to an after market fuel tank or fuel cell. The Motobilt Jeep TJ Fuel Pump\/Sending Unit Clamping Ring is designed to be used with fuel cells like the RCI 2161a. Installing the ring is simple. You can use the adapter ring as a template to drill holes in your fuel tank. The kit is shipped with the upper clamp ring assembly; which is welded together on the bottom side. Unlike some of the others on the market, we have the bolts passing through both plate to prevent the ring from deforming when you tighten it down.\u003c\/p\u003e\u003cp\u003eThe bottom ring that goes inside the tank has a split in the ring so you can get it into the tank. This ring allows the top and the ring to bolt down without deforming the fuel tank or fuel cell. The upper ring assembly is CNC cut from 1\/8 inch thick steel and the inner split ring is CNC cut from 14 GA steel. The top ring is powdercoated black and the bottom rings are shipped out bare metal. The kit also includes (12) 1\/4-28 bolts, lock nuts, and nylon washers. Once the ring is installed, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eJeep TJ Fuel Pump\/Sending Unit Clamping ring\u003c\/li\u003e\n\u003cli\u003eUpper ring assembly is CNC cut from 1\/8 inch thick steel\u003c\/li\u003e\n\u003cli\u003eInner split ring is CNC cut from 14 GA steel\u003c\/li\u003e\n\u003cli\u003eTop ring is powdercoated black\u003c\/li\u003e\n\u003cli\u003eBottom rings are shipped bare metal\u003c\/li\u003e\n\u003cli\u003eIncludes (12) 1\/4-28 bolts, lock nuts, and nylon washers\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":47549787275573,"sku":"HJQL_MB5007","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3135\/4933\/products\/MB5007-HJQL.jpg?v=1701801058"},{"product_id":"fuel-cell-mount-for-30x12x12-fuel-cells-motobilt","title":"Fuel Cell Mount For 30x12x12 Fuel Cells Motobilt","description":"\u003cp\u003eThe Motobilt Fuel Cell Mount for the 30 x 12 x 12 or the MB5010 TJ\/LJ was designed utilizing the latest 3D CAD design software to ensure a proper fit. The kit consists of three parts including the main under tank plate and two clamp bodies. The main under tank plate is a one piece design unlike some of the others on the market.\u003c\/p\u003e\u003cp\u003eThis design cost a little more to manufacture due to the large plate. It eliminates the sharp edges coming in contact with the bottom side of the fuel cell. This can be important in some situations where you may have body and\/or chassis flex. The under tank plate is CNC Laser Cut from .125 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the part.\u003c\/p\u003e\u003cp\u003eThe 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 16 gauge steel. The parts are formed on a hydraulic press brake.\u003cbr\u003e The Fuel cell mount is shipped bare metal. You will need to paint or powdercoat the part. The bolts required are not shipped due to the different mounting options. The fuel cell  is not included with the mount.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel Cell Mount for the 30 x 12 x 12\u003c\/li\u003e\n\u003cli\u003eCNC Laser Cut but from 16 gauge steel\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from .125 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eShips bare metal. You will need to paint or powdercoat the part\u003c\/li\u003e\n\u003cli\u003eBolts not included\u003c\/li\u003e\n\u003cli\u003eThe fuel cell not included\u003c\/li\u003e\n\u003cli\u003eDimple die holes available option\u003c\/li\u003e\n\u003cli\u003eThe RCI2191A Fuel Cell has gone through many changes over the years and you will need to verify the top of your fuel cell before ordering to ensure it will work for your application.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":47549788520757,"sku":"HJQL_MB3010","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3135\/4933\/products\/MB3010-HJQL.jpg?v=1701801074"},{"product_id":"jeep-tj-lj-aluminum-fuel-cell-19-gallon-97-06-wrangler-tj-tj-unlimited-motobilt","title":"Jeep TJ\/LJ Aluminum Fuel Cell 19 Gallon 97-06 Wrangler TJ\/TJ Unlimited Motobilt","description":"\u003cp\u003eMotobilt MB5010-TJ offers a solution for relocating the fuel tank in your Jeep TJ. The Motobilt MB5010-TJ\/LJ was designed to use the stock Jeep TJ fuel pump and designed to fit in the back bed of your Jeep. It is 30 x 12 x 12 inch. This will Not fit behind your seat. The tank has a capacity of roughly 18.7 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system. The Motobilt fuel cell mount will fit this tank perfectly.\u003c\/p\u003e\u003cp\u003eThe kit consists of three parts the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely.\u003c\/p\u003e\u003cp\u003eThe Motobilt tank features one fitting on top of the tank which has a roll over valve for a vent line. The MB5010-TJ Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! Once the ring is installed, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel tank in your Jeep TJ\u003c\/li\u003e\n\u003cli\u003e30 inch x12 inch x 12 inch\u003c\/li\u003e\n\u003cli\u003eRoughly 18.7 US gallons capacity\u003c\/li\u003e\n\u003cli\u003eCNC cut from 1\/8 inch 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eTIG welded for ultimate strength\u003c\/li\u003e\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eThis Fuel Cell Does Not fit behind the factory seat\u003c\/li\u003e\n\u003cli\u003eYou must purchase the Clamping ring MB5007 if you have not already done so previously\u003c\/li\u003e\n\u003cli\u003eFuel mount sold separately PN MB5010\u003c\/li\u003e\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":47549789372725,"sku":"HJQL_MB5010-TJ","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3135\/4933\/products\/MB5010-TJ-HJQL.jpg?v=1701801089"},{"product_id":"fuel-cell-19-gallon-motobilt","title":"Fuel Cell 19 Gallon Motobilt","description":"\u003cp\u003eMotobilt offers a solution for relocating the fuel tank in your Jeep TJ. The Motobilt MB5010-3AN was designed to use the stock Jeep TJ fuel pump and designed to fit in the back bed of your Jeep. It is 30 x 12 x 12 inch. This will Not fit behind your seat. The tank has a capacity of roughly 18.7 US gallons. The Motobilt tank features 3 number 8 -AN fittings on top of the tank which are tig welded into place. The Motobilt fuel tank is CNC cut from 1\/8 inch 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system. The Motobilt fuel cell mount will fit this tank perfectly.\u003c\/p\u003e\u003cp\u003eThe kit consists of three parts the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely.\u003c\/p\u003e\u003cp\u003eThe Motobilt tank features one fitting on top of the tank which has a roll over valve for a vent line. The MB5010-3AN Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! Once the ring is installed, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel tank in your Jeep TJ\u003c\/li\u003e\n\u003cli\u003e3 number 8 -AN fittings on top of the tank which are tig welded into place\u003c\/li\u003e\n\u003cli\u003e30 inch x12 inch x 12 inch\u003c\/li\u003e\n\u003cli\u003eRoughly 18.7 US gallons capacity\u003c\/li\u003e\n\u003cli\u003eCNC cut from 1\/8 inch 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eTIG welded for ultimate strength\u003c\/li\u003e\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eThis Fuel Cell Does Not fit behind the factory seat\u003c\/li\u003e\n\u003cli\u003eYou must purchase the Clamping ring MB5007 if you have not already done so previously\u003c\/li\u003e\n\u003cli\u003eFuel mount cell available\u003c\/li\u003e\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":47549791469877,"sku":"HJQL_MB5010-3AN","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3135\/4933\/products\/MB5010-3AN-HJQL.jpg?v=1701801103"},{"product_id":"jeep-tj-lj-aluminum-fuel-cell-15-gallon-97-06-wrangler-tj-tj-unlimited-motobilt","title":"Jeep TJ\/LJ Aluminum Fuel Cell 15 Gallon 97-06 Wrangler TJ\/TJ Unlimited Motobilt","description":"\u003cp\u003eThe Motobilt Jeep TJ\/LJ fuel cell was designed to mount in the bed of your Jeep TJ or LJ. It will use your factory Jeep TJ or LJ fuel pump and is made out of 1\/8 inch aluminum that is TIG welded. Motobilt offers a solution for relocating the fuel tank in your Jeep TJ. The Motobilt MB5005-TJ was designed to use the stock Jeep TJ fuel pump and designed to fit in the back bed of your Jeep. It is 30 inch x 12 inch x 9 inch and can fit behind your seat if you choose too. The tank has a capacity of roughly 15 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system. The Motobilt MB3000 fuel cell mount will fit this tank perfectly.\u003c\/p\u003e\u003cp\u003eThe kit consists of three parts: the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely. The Motobilt tank features one fitting on top of the tank which has a roll over valve for a vent line. The MB5005-TJ Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary!\u003c\/p\u003e\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearace.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eJeep TJ\/LJ aluminum fuel cell\u003c\/li\u003e\n\u003cli\u003e30 inch x 12 inch x 9 inch\u003c\/li\u003e\n\u003cli\u003e15 US gallons capacity\u003c\/li\u003e\n\u003cli\u003eCNC cut from 1\/8 inch 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eMount sold separately PN MB3000\u003c\/li\u003e\n\u003cli\u003eYou must purchase the Clamping ring if you have not already done so previously PN MB5007\u003c\/li\u003e\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":47549791994165,"sku":"HJQL_MB5005-TJ","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3135\/4933\/products\/MB5005-TJ_0-HJQL.jpg?v=1701801120"},{"product_id":"jeep-tj-lj-aluminum-fuel-cell-19-gallon-package-97-06-wrangler-tj-tj-unlimited-motobilt","title":"Jeep TJ\/LJ Aluminum Fuel Cell 19 Gallon Package 97-06 Wrangler TJ\/TJ Unlimited Motobilt","description":"\u003cp\u003eMotobilt MB5010-TJ-3000-5007 offers a solution for relocating the fuel tank in your Jeep TJ. The Motobilt MB5010-TJ\/LJ was designed to use the stock Jeep TJ fuel pump and designed to fit in the back bed of your Jeep. It is 30 x 12 x 12 inch. This will Not fit behind your seat. The tank has a capacity of roughly 18.7 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system. The Motobilt fuel cell mount and fuel pump claming ring are included.\u003c\/p\u003e\u003cp\u003eThe mount consists of three parts the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely.\u003c\/p\u003e\u003cp\u003eThe Motobilt tank features one fitting on top of the with a 90 degree roll over valve and barbed hose fitting.  A 2nd -8 AN fitting has been added for the 2005-2006 models as they require a return line. Older model TJ's will simply cap this fitting off as its not needed on the early models.The MB5010-TJ Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! Once the ring is installed, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance.\u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel tank in your Jeep TJ\u003c\/li\u003e\n\u003cli\u003eSteel mount\u003c\/li\u003e\n\u003cli\u003eFuel pump clamping ring\u003c\/li\u003e\n\u003cli\u003e30 inch x12 inch x 12 inch\u003c\/li\u003e\n\u003cli\u003eRoughly 18.7 US gallons capacity\u003c\/li\u003e\n\u003cli\u003eCNC cut from 1\/8 inch 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eTIG welded for ultimate strength\u003c\/li\u003e\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eThis Fuel Cell Does Not fit behind the factory seat\u003c\/li\u003e\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":47549856678197,"sku":"HJQL_MB5010-TJ-3010-5007","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3135\/4933\/products\/MB5010-TJ-3010-5007-HJQL.jpg?v=1701802562"},{"product_id":"fuel-cell-19-gallon-with-mount-motobilt","title":"Fuel Cell 19 Gallon With Mount Motobilt","description":"\u003cp\u003eMotobilt offers a solution for relocating the fuel tank in your Jeep or buggy. The Motobilt MB5010-3AN with mount was designed to fit in the back bed of your Jeep, truck or buggy. It is 30 x 12 x 12 inch. This will Not fit behind your seat. The tank has a capacity of roughly 18.7 US gallons. The Motobilt tank features 2 number 8 -AN fittings on top of the tank which are tig welded into place. A 3rd 90 degree brass roll over valve with barbed hose fitting is installed for the vent line . The Motobilt fuel tank is CNC cut from 1\/8 inch 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system. The Motobilt fuel cell mount MB3010 is included\u003c\/p\u003e\u003cp\u003eThe kit consists of three parts the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely.\u003c\/p\u003e\u003cp\u003eThe Motobilt tank features one fitting on top of the tank which has a roll over valve for a vent line. The MB5010-3AN Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! Once the ring is installed, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed.\u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel tank in your Jeep, truck, or buggy\u003c\/li\u003e\n\u003cli\u003e2 number 8 -AN fittings on top of the tank which are tig welded into place\u003c\/li\u003e\n\u003cli\u003e1 90 degree brass roll over valve with barbed hose fitting for vent line\u003c\/li\u003e\n\u003cli\u003e30 inch x12 inch x 12 inch\u003c\/li\u003e\n\u003cli\u003eMount Included\u003c\/li\u003e\n\u003cli\u003eRoughly 18.7 US gallons capacity\u003c\/li\u003e\n\u003cli\u003eCNC cut from 1\/8 inch 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eTIG welded for ultimate strength\u003c\/li\u003e\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eThis Fuel Cell Does Not fit behind the factory seat\u003c\/li\u003e\n\u003cli\u003eFuel mount MB3010 included\u003c\/li\u003e\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":47549856809269,"sku":"HJQL_MB5010-3AN-3010","price":629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3135\/4933\/products\/MB5010-3AN-3010-HJQL.jpg?v=1701802571"},{"product_id":"jeep-tj-lj-aluminum-fuel-cell-15-gallon-package-97-06-wrangler-tj-tj-unlimited-motobilt","title":"Jeep TJ\/LJ Aluminum Fuel Cell 15 Gallon Package 97-06 Wrangler TJ\/TJ Unlimited Motobilt","description":"\u003cp\u003eThe Motobilt Jeep TJ\/LJ fuel cell package was designed to mount in the bed of your Jeep TJ or LJ. It will use your factory Jeep TJ or LJ fuel pump and is made out of 1\/8 inch aluminum that is TIG welded. Motobilt offers a solution for relocating the fuel tank in your Jeep TJ. The Motobilt MB5005-TJ was designed to use the stock Jeep TJ fuel pump and designed to fit in the back bed of your Jeep. It is 30 inch x 12 inch x 9 inch and can fit behind your seat if you choose too. The tank has a capacity of roughly 15 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch 5052 aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system. The Motobilt MB3000 fuel cell mount and MB5007 fuel pump clamping ring are included.\u003c\/p\u003e\u003cp\u003eThe mount consists of three parts: the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely. The Motobilt tank features one fitting on top of the tank which has a roll over valve for a vent line. The MB5005-TJ Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary!\u003c\/p\u003e\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearace.\u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eJeep TJ\/LJ aluminum fuel cell\u003c\/li\u003e\n\u003cli\u003eMB3000 Fuel Cell Mount\u003c\/li\u003e\n\u003cli\u003eMB50007 TJ fuel pump clamping ring\u003c\/li\u003e\n\u003cli\u003e30 inch x 12 inch x 9 inch\u003c\/li\u003e\n\u003cli\u003e15 US gallons capacity\u003c\/li\u003e\n\u003cli\u003eCNC cut from 1\/8 inch 5052 aluminum\u003c\/li\u003e\n\u003cli\u003ePress brake formed\u003c\/li\u003e\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":47549857136949,"sku":"HJQL_MB5005-TJ-3000-5007","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3135\/4933\/products\/MB5005-TJ-3000-5007-HJQL.jpg?v=1701802587"},{"product_id":"suzuki-samurai-fuel-filter-kit-low-range-off-road","title":"Suzuki Samurai Fuel Filter Kit Low Range Off Road","description":"\u003cp\u003eSuzuki Samurai gas tanks are getting older with time and therefore the fuel filter will most likely be plugged with debris from degrading interior walls of the tank. If your filter looks like it has never been replaced, then maybe it is time.\u003c\/p\u003e\u003cp\u003eWe put this kit together so that you don't have to source all the parts yourself. \u003cbr\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel Filter\u003c\/li\u003e\n\u003cli\u003eFuel Filter Clamp\u003c\/li\u003e\n\u003cli\u003eFuel Filter Clamp Bolt\u003c\/li\u003e\n\u003cli\u003eHigh Quality Gates Brand Fuel Hose Cut to Factory Length\u003c\/li\u003e\n\u003cli\u003e4 Stainless Steel Hose Clamps\u003c\/li\u003e\n\u003cli\u003eFits Carbureted Suzuki Samurai and Similar Models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Low Range Offroad","offers":[{"title":"Default Title","offer_id":47802715078965,"sku":"HWFZ_SER-FPK","price":38.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3135\/4933\/products\/SER-FPK-HWFZ.jpg?v=1704735541"}],"url":"https:\/\/4wheelingplus.com\/es\/collections\/fuel.oembed","provider":"4wheelingplus.com","version":"1.0","type":"link"}