Jowl™ Recovery Split Shackle™ 7/8

COMBINE TWO COLORS!!!! Combo colors are sold as pairs and include two shackles. (GET 10% OFF!!) Use the DROPDOWN MENU above the Add to Cart button to choose your color combo.

Introducing the 7/8 Jowl™ Recovery Split Shackle™, a larger version of our original "PATENTED" split shackle™ that's transforming the recovery scene. Designed for large trucks and utility vehicles this innovative split "J" design eliminates the need for tools or soft shackles, streamlining rope and strap connections for faster setups. Say goodbye to the hassle of removing shackles from your bumper or hitch receiver – with our shackle, you can make connections and hook up ropes or straps on the fly, making tool-less closed recoveries a breeze on the trail or in challenging environments.

THIS CHANGES EVERYTHING!

Just open up the Jowl™ shackle hooked sides, insert your recovery rope or tow strap looped end, rotate the end of the tow rope or strap to engage both sides of the shackle, pull tight and you are ready to recover your stuck vehicle.

We designed the Jowl™ with a D-Ring shackle shape for those off-roaders who prefer a more traditional shackle look on their rigs. Built-in pull angle stops are visual reminders that give you feedback to help you keep your pull angles low keeping your recovery safe and as efficient as possible.

The Jowl™ 7/8 Recovery Shackle fits any 2.5 inch Class V shackle receiver hitch bracket mount with a 1 inch (1.0") pin hole and a mount width of 1.49 inches or less.

PLEASE NOTE: A very popular bumper mount hole inside diameter is often listed on bumper specs information as 1.0 inch. Many manufacturers use this common bore size when machining their mounts. However, after coating the entire bumper including the inside of the mount holes with thick textured or powder coatings this added thickness decreases the inside diameter of the holes well under 1.0 inch, down to around 0.950in, making the hole size too small for a 1.0 inch pin. In most cases a 1.0 inch diameter hole is intended for a 3/4 size shackle that has a 7/8” (0.875in) pin diameter. If your bumper has 1.0 mount holes please refer to our VEHICLE SIZE RECOMMENDATION GUIDES for further assistance.

All color options are fully interchangeable. Buy two different color shackles and combine the two symmetrical hook halves to match the color scheme of your rig and give your build a more custom accented look. The hooked sides are fully covered with a durable powder coating pantone color matched to popular truck and Jeep colors. The shackle pin is Black Nickel plated and machined from High Strength Grade 8 Carbon Steel.

This 6.5T (13,000 LB WLL) forged chromoly steel shackle is guaranteed to speed up vehicle recovery so you can spend more time enjoying the trail instead of being stuck in it.

Built-in rubber anti-chatter pads stop the hooked sides from rattling against each other as you navigate the roughest trails.

Each shackle includes six durable nylon shackle isolators. Two 3.0mm thick washers, two 2.0mm thick washers and two 1.0mm thick washers help you center your Jowl™ shackle on any width bumper shackle mount, gusset, winch rope, or shackle receiver.

We made mounting the Jowl™ easy. The shackle pin is secured by two Metric M22 cap screws that accept any 3/8" socket wrench. Just grab two 3/8 inch ratchets and easily remove or attach the shackle to your vehicle without the need to find the correct allen keys or hex wrenches out on the trail. (Bonus: only one screw needs to be removed to attach or remove the shackle from your vehicle adding to the speed and functionality of this design.) Two 6mm Hex to 3/8" square drive adapters are also included with each Jowl™ split shackle™ for easy installation.

Single Color is sold as one shackle

All Two Color Combos are sold as pairs and include two shackles

Black Hole - RAL 9005

Gun Gray - RAL 7015

Pure White - RAL 9003

Grape Escape - PSS-1676

Blue Balls - RAL 5005

Sublime Green - RAL 6018

Detonator Yellow - RAL 1023

Obscene Orange - RAL 2009

Flame Red - RAL 3020

Pretty Pink - RAL 4003

Pogo Pink - RAL 4010

Nice Gal - Galvanized / Nickel Coated

Brass Knuckle - Yellow Zinc Coated

Buff Bronze - UMB-4548

Raw Dog - Uncoated (See warning below - will rust if left uncoated)

The "Raw Dog" uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing. Only the Jowl™ hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality. (***Please note: this option will show signs of weathering and rust if left uncoated.)

Specs:

• Item: Split Shackle™ / Anchor Shackle
• Color: Nice Gal
• Pin Style: Proprietary Design
• WLL (Working Load Limit): 6.5T or 13,000 lb.
• FoS (Factor of Safety): 5:1
• MBS (Minimum Breaking Strength): 32.5T or 65,000lbs
• Width Between Ears: 1.49" (38.00mm)
• Body Finish: Powder Coated
• Pin Finish: Black Nickel Plated
• Pin Diameter: 1 inch (1.0")
• Thread Size: M22 x 2.5mm
• Pin Material: Grade 8 Carbon Steel
• Body Material: Chromoly Steel
• PATENT No. D1,050,874

Manual: Jowl Split Shackle 7/8 Read First Instructions Download

Manual: Raw Dog Custom Color Coating Instructions

Resource: Split Shackle Vehicle Size Reference Guide

Jowl™ Split Shackle™ Installation

Save 15% when you purchase a Shackle Receiver Combo Today! Click Here

More Specs and Dimensions

View Other Colors